Pro-Cam 9351 Chevy 6-Valve 7.5 PSI Mechanical Fuel Pump-130 GPH

Description

Maintains more constant pressure at high rpms, It is compatible with gasoline, E85, & methanol, Features new billet components and does not require a regulator, This fuel pump has been re-engineered to reduce leaks and maintain pressure, Designed to increase flow, and machined with 1/2" inlet and outlet to get more fuel to the engine faster
Pro-Cam 9351 Chevy 6-Valve 7.5 PSI Mechanical Fuel Pump-130 GPH
Sku # 9109351
Mfr. Part # 9351
Condition
New
Brand
Pro-Cam
Sold
Each
Details
Notes
Tech Tips
Running alcohol?  To prevent seals and other components from drying out and leaking, flush the pump with gasoline on a regular basis to lubricate the seals.  This is particularly important at the end of the season
PSI is rated at full throttle and may be higher at idle
If you need to reclock the pump, remove all bolts and separate the pump body into two sections (top and bottom) before rotating
Info
This pump may look similar to others on the outside, but the internal components of the Pro/Cam fuel pump have been re-engineered to reduce leaks and maintain pressure. It is completely reworked to increase flow, and machined with 1/2" inlet and outlet to get more fuel to the engine faster. Maintains more constant pressure at high rpms. Blueprinted for longevity and quality.
NEW Pro/Cam 6 valve Small Block Chevy fuel pump
Re-engineered for improved reliability and performance
New billet components
No regulator required
Lighter weight (1 lb. lighter)
Gasoline, E85, & Methanol compatibility
1/2" inlet and outlet for maximum fuel flow
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
California Customers: This part has been identified as emissions sensitive and can only legally be installed on race-use only vehicles, off-road-use only vehicles, or pre-1965 vehicles in the State of California in accordance with the California Air Resource Board (CARB) requirements. Once your order is placed you will be contacted by Speedway Motors within 2 business days so that you can certify that you will only use such parts on these types of vehicles in California.
Specs
Material Type
Aluminum
Sold in Quantity
Each
Fuel Type
Gasoline | Alcohol
Inlet Attachment
Female Threads
Inlet Quantity
1
Outlet Quantity
1
Outlet Attachment
Female Threads
Regulator Required
No
Maximum Pressure
7.5
MFG. Part #
9351
Free Flow Rate
130 GPH / 492 LPH
Inlet Size
1/2" NPT
Outlet Size
1/2" NPT
Fuel Pump Inlet Size
1/2" NPT
Fuel Pump Outlet Size
1/2" NPT
Reviews
I would buy this again
Rated
by Honest joe on November 16, 2020
Summary:
Worked great
Yes, I recommend this product.
Would buy again
Rated
by Racingted on June 20, 2018
Summary:
Installed on b mod crate motor has worked great .
Yes, I recommend this product.
I would buy this again
Rated
by Manalynn on April 13, 2018
Summary:
Great product
I have bought this product ...... I owned a few of them...
Rated
by Racerjeff on July 27, 2017
Summary:
Only had a problem with one of them... Speedway stood behind them and shipped me a new one....
Yes, I recommend this product.
Very satisfied
Rated
by Chuck on April 27, 2017
Summary:
We buy all our parts with you
Pros:
Easy To Set Up
Easy To Store
Yes, I recommend this product.
Related Items / Suggested Parts
Speedway Small Block Chevy 110 GPH Racing Fuel Pumps
Pro-Cam 9350 Chevy 6-Valve Mechanical Fuel Pump-130 GPH, 15 PSI
Moroso 65750 Lightweight Fuel Pump Pushrod
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.