Garage Door Torsion Springs 192 X 2" X 16" - 28" (Pair) With Winding Bars

Description

Garage Door Torsion Springs 192 X 2" X 16" - 28" (Pair) With Winding Bars
FAST
SHIPPING
30 DAYS
MONEYBACK
100%
GENUINE
EXCELLENT
SERVICE
Description
Spring Length
Installation Instructions
Our Made in U.S.A. High Quality Coated Torsion Springs are factory coated black for smoother, cleaner operation and also corrosion resistant and oil tempered for longer life.
For use on doors 7' or 8' high doors with 4" standard lift drums. Engineered for maximum application range. Minimum 10,000 cycles, at +/- 7.5 lbs of target door weight. Springs are made of steel coils with aluminum cones.
Make sure you order the correct spring by comparing the information in spring length tab with what you have.
Measure your current spring (broken pieces included) from spring coil end to end - cones not included.
How to Determine if Torsion Spring is Left Hand or Right Hand Wound:
Standard springs are coded red and black. Red is right hand wind. Black is left hand wind. Always determine the wind of the wire.
To determine if you are ordering a right wind spring or left wind spring the easiest way would be check the coloring coding - if is it red or black.
Please note the side of door the spring is mounted DOES NOT indicate spring wind needed. Standard garage door systems have the right hand wound red winding cone on the end and will be mounted w/ the red winding cone pointing towards the LEFT. The left hand wound black winding cone will be mounted w/ the black winding cone pointing towards the RIGHT.
Right hand wind would be wound counter clock wise in this diagram with the spring mounted on the left side of bracket.
Left hand wind would be wound clockwise in the diagram with the spring mounted on the right side of bracket.
After you've determined the the left & right hand winds you should have enough information to order.
Length of 20 Coils
Wire Size
Length of 20 Coils
Wire Size
2 1/2"
.125
5 3/4"
.289
2 3/4"
.135
5 7/8"
.295
2 7/8"
.142
6 1/8"
.3065
3"
.1483
6 1/4"
.3125
3 1/8"
.1562
6 3/8"
.3195
3 1/4"
.162
6 5/8"
.331
3 3/8"
.170
6 7/8"
.3437
3 1/2"
.177
7 1/4"
.3625
3 3/4"
.1875
7 1/2"
.375
3 7/8"
.192
7 7/8"
.3938
4 1/8"
.207
8 1/8"
.4062
4 3/8"
.218
8 7/16"
.4218
4 1/2"
.2253
8 5/8"
.4305
4 5/8"
.2343
8 3/4"
.4375
4 7/8"
.2437
9 1/16"
.4531
5"
.250
9 1/4"
.4615
5 1/4"
.2625
9 3/8"
.4687
5 1/2"
.273
9 3/4"
.490
5 5/8"
.283
10"
.50
WARNING -
Garage door springs, cables, brackets, and other hardware attached to the springs are under very high tension and, if handled improperly, can cause serious injury. Only a qualified professional or a mechanically experienced person should adjust them, but only by carefully following the manufacturer's instructions. If you attempt to make the repairs yourself, you are doing this at your own risk. 365garagedoorparts is not responsible for any injuries, damages of any kind, or death. Purchase of springs from us deems agreement with these terms
You may also like....
Pair-of 243 Garage Door Torsion Springs Any Length Up to 43" With Winding Bars
.02-.92
Pair of .250 Garage Door Torsion Springs Any Length Up to 43" With Winding Bars
.92-.17
Garage Door Torsion Spring 218 X 2" X 22" - 35" ( Pair ) With Winding Rods
.00-.00
Garage Door Torsion Springs 1-3/4" X .225 ANY Length 19" - 31" WITH Winding Bars
.50
Store Newsletter
Add 365 Garage Door Parts to your favourite stores and receive our exclusive emails about new items and special promotions!
Store Pages
Home
About Us
Shipping
Return
Feedback
Contact
We Accept
Copyright © 2016
365 Garage Door Parts
. All Rights Reserved.