DuroSTEEL JANUS 12X8 Heavy Duty 3400 Series HURRICANE WIND-RATED Roll-up Door

Description

9
Duro 12'Wide by 8'Tall Model 3400 Certified
Wind Rated                        Commercial
Steel Roll up Door
Including
Reduced Drive Chain Hoist
DESCRIPTION
Miami-Dade County Certified Wind Load Rated Rolling Sheet Door
The Model 3400 series has been specifically engineered for Miami-Dade County, Florida. With an ability to withstand high winds, the door meets Miami-Dade County’s stringent building codes. The door is also easy to install and uses a 12” drum wheel. Other features and specific measurements of the door are as follows:
Maximum opening size of 12’ wide x 18’ high (216 sq.ft.)
Push-up, hand chain and electric operations
PSF Ratings:
+43 PSF and -49 PSF
Commercial Door Features
Features Include
Curtain
24-gauge galvanized corrugated steel
Grade 80 galvanized steel
Available in white only
Super Durable polyester paint coatings, which are corrosion resistant
Wash coat over primer interior side
40-year film integrity warranty — up to 25-year chalk and fade
Flexible nylon wear strips
Bottom Bar
24 gauge acrylic-coated galvalumed roll formed steel
2” x 1 ½” galvanized angle
Bulb astragal (Durometer 75)
Stainless steel nuts and bolts
Axle/Torque Tube
Oil tempered torsion springs conforming to ASTM A229
16-gauge, 12” diameter galvanized drum
Low friction, grease-filled steel ball bearings staked in each drum
26 gauge spiral torque tubing that houses axle assembly
Guides
12 gauge galvanized steel guide, with 11 gauge windlock bar spot welded guide
Bolt on head stop ¼” thick steel
2-7/8″ guide depth
Pre-punched for lock and attachment bolts
Vinyl guide wear strip
Universal jamb mount
Hardware
Bottom bar mounted 10 gauge slide locks – 2 per door
Bottom bar mounted 16 gauge step plate – 2 per door
12 gauge door mounting brackets
1-5/16” tension holding device
We Sell More Than Parts - We Also Sell Steel Buildings!
High Quality I-Beam Buildings by Duro Steel
Highly versatile and perfect for any commercial industrial, farm, or consumer application. Each building is custom designed to your specification, and still accommodates your county wind and snow load. It will meet or exceed industry standards and regional requirements.
Our steel commercial buildings, with few width limitations, allow you to erect huge metal buildings with clear spans widths of 100 to 200+feet (30-60+ meters). An excellent choice of American-made structures: from airplane hangars to mini-storage type buildings with multiple interior units with individual exterior doors.
High Quality Arch Buildings by Duro Steel
Duro Span hut is defined as any self-supporting structure, usually in an "arch" or curved shape. There are no interior posts, trusses or support beams of any kind. The exterior sheeting is the building. To assemble an Duro Span building, you first layout each individual section of the arch on the ground (each section is usually no bigger then 8-12 feet long (3-4 meters).
You bolt all the sections together to make the first arch. You pull up the assembled arch and attach it to its foundation. Each additional section is assembled in the same manor and attached to the other standing arches. Each arch is usually about 2 feet wide (1/2 meter). To make the building longer, just add more arches. There is no limit as to how long this building can be. End walls may be provided by the manufacturer, or you can build your own. Unique to the Duro Span arch type steel building is you can leave one or both ends completely open without losing the integrity of the structure.
For more information about our complete line of steel buildings, please
Visit our eBay Store!
Contact Duro for Shipping Prices
Questions? Contact us today.
SHIPS FROM: GA, TX, AZ, FL, CA
All Content ©2015 Duro Steel Buildings & Steel Building Building Parts