625 cc/min, Fuel Injector, Keihin, Husaberg, Hayabusa Phase 2 Primary Secondary

Description

CUSTOM, FLOW-MATCHED SETS OR SINGLE FUEL INJECTORS
List Price: Includes One (1) fuel injector
4 cylinder Engine:
SUPPORTS 300+
TURBO-HORSEPOWER at 43-45 PSI (3.0 BAR)
SUPPORTS 400+
TURBO-HORSEPOWER at 62-65 PSI (4.5 BAR)
OEM Original Equipment fuel injectors
Custom flow-matched sets available
No adapters required
FLOW CHART
: Each fuel injector; single or complete set purchased is sold with a flow-data chart indicating individual static flow rates at 3.0, 3.5, and 4.0 BAR. As well as 3.0 BAR dynamic pulse testing for idle (15% duty-cycle) and 50% duty-cycle. Along with a complete dead time, off-set (latency) table. Flow matching was done with industry-standard equipment of the highest quality.
The tests were performed at varying temperatures to achieve realistic results. Linear tuning with excellent low-end, and idle rpm.
Body Design
: Composite plastic, black
I
njector type
: Top feed, saturated
3.0 BAR Flow Rate:
625cc/min
4.5 BAR Flow Rate:
760cc/min
FUEL NOZZLE
: Flat disc, single-hole
Sample dead time (latency): 0.325 ms at 14 volts
Length, overall: 44.3 mm
Diameter: 14 mm
Fuel rail o-ring: Viton, 11.5 mm
Resistance: 12.5 Ohms
Electrical connector type: KEIHIN (MINI)